How To Get Sand Out Of Swimsuit (Step-By-Step Guide)

The beach is a fantastic place to relax, enjoy the sun, and have a great time. However, when sand finds its way into your swimsuit, it can cause discomfort and irritation. The tiny grains seem to stick to the fabric and can be challenging to remove completely. But worry not, I’ve some simple yet effective solutions to tackle this issue. Read on to discover effective ways to get sand out of your bathing suit.

How To Get Sand Out of Swimsuit (With Video)

  • Shake it off
  • Rinse with fresh water
  • Soak in a vinegar solution
  • Gently rub and rinse
  • Hand wash with mild detergent
  • Rinse and squeeze

1. Shake it off

The first step in removing sand from your swimsuit is to give it a good shake. Stand in an open area away from any sensitive surfaces and gently shake the swimsuit to dislodge loose sand particles. By doing this, you’ll be able to remove a significant amount of sand, making the subsequent steps more effective.

2. Rinse with fresh water

After shaking off the loose sand, head to the nearest freshwater source, such as a sink or shower. Rinse your swimsuit thoroughly under cool running water. This will help remove additional sand and prevent it from embedding further into the fabric.

3. Soak in a vinegar solution

To tackle any remaining sand particles and ensure thorough cleaning, prepare a vinegar solution. In a large basin or sink, mix equal parts of water and white vinegar. Submerge your swimsuit in the solution and let it soak for approximately 30 minutes. Vinegar is a natural and gentle cleaning agent that helps loosen sand and other debris from the fabric.

4. Gently rub and rinse

After the vinegar soak, gently rub the fabric together, focusing on areas where sand might be trapped. Be cautious not to scrub too vigorously, as this could damage the delicate fibers of your swimsuit. Once you’ve thoroughly rubbed the fabric, rinse it under running water to remove any remaining vinegar and sand particles.

5. Hand wash with mild detergent

Next, it’s time to hand wash your swimsuit using a mild detergent specifically formulated for delicate fabrics. Fill a basin with lukewarm water and add a small amount of the detergent. Gently agitate the water to create a soapy solution, then place your swimsuit in the basin. Gently swirl and knead the fabric to ensure the detergent reaches every nook and cranny, effectively removing any remaining sand particles.

6. Rinse and squeeze

Once you’ve completed the hand-washing process, rinse your swimsuit under cool water to remove all traces of detergent. Be thorough in this step to prevent any residue from irritating your skin. After rinsing, gently squeeze the fabric to remove excess water. Avoid wringing or twisting the swimsuit, as this can cause damage and affect its shape.

7. Air dry

The final step in the sand removal process is to allow your swimsuit to air dry naturally. Find a well-ventilated area, preferably outdoors or near a window, and lay the swimsuit flat on a clean towel. Avoid direct sunlight, as it can cause the colors to fade. Allow the swimsuit to dry completely before storing or wearing it.

NOTE: When you are at the beach, always put into consideration what you intend to do at the beach. I ain’t saying you shouldn’t have fun and all that, but I am trying to say you should not engage yourself in activities that will get sand into your bathing suit.

How to Remove Sand Stains from Bathing Suits

Step 1: Shake and brush off excess sand

Before attempting any stain removal, it’s important to remove as much sand as possible from your bathing suit. Take the suit to a well-ventilated area and gently shake it to dislodge loose sand particles. Next, use a soft-bristled brush or your hands to brush off any remaining sand. This initial step will prevent the sand from grinding into the fabric during the cleaning process.

Step 2: Rinse with cold water

Once you’ve removed the excess sand, rinse the bathing suit under cold running water. Avoid using hot water, as it can set the stain and make it more challenging to remove. Allow the water to flow through the fabric, focusing on the stained areas. Gently rub the fabric together to help loosen any embedded sand particles.

Step 3: Pre-treat with stain remover

For stubborn sand stains, consider pre-treating the affected areas with a stain remover. Choose a stain remover that is safe for the fabric of your bathing suit. Apply a small amount directly to the stained areas and gently rub the fabric together. Let the stain remover sit on the fabric for a few minutes to allow it to penetrate the fibers.

Step 5: Hand wash with mild detergent

After pre-treating with a stain remover, hand washes your bathing suit using a mild detergent specifically formulated for delicate fabrics. Fill a basin or sink with cool water and add the recommended amount of detergent. Submerge the swimsuit and gently agitate it for a few minutes, paying extra attention to the stained areas. Avoid excessive rubbing, as it may damage the fabric.

Step 6: Rinse and repeat

Once you’ve finished washing, thoroughly rinse the bathing suit under cold running water to remove any remaining detergent and loosened stains. Inspect the fabric to see if the stains have been completely removed. If necessary, repeat the pre-treating and hand washing steps until the stains are gone. Avoid wringing or twisting the swimsuit, as it may stretch or damage the fabric.

Step 7: After washing, gently squeeze out the excess water from the bathing suit without wringing it

Lay a clean towel on a flat surface and place the swimsuit on top to absorb more moisture. Avoid drying the bathing suit under direct sunlight, as it can cause fading or damage to the fabric. Instead, find a well-ventilated area or use a drying rack to air dry the swimsuit.

How to Prevent Sand from Getting in Your Swimsuit

There’s nothing more frustrating than heading to the beach or pool, only to find sand lodged in your swimsuit. The uncomfortable sensation of sand stuck in bathing suit fabric can quickly turn a pleasant swim into an annoyance.

Fortunately, you can take several simple steps to prevent sand from getting in your swimsuit and ensure a more enjoyable beach experience. Read on to discover effective strategies for keeping sand at bay.

1. Choose the right swimsuit

Selecting the right swimsuit can make a significant difference in preventing sand from getting trapped. Opt for swimsuits made of tightly woven fabrics such as spandex or nylon, as these materials are less likely to retain sand. Avoid swimsuits with loose weaves or intricate crochet designs, as sand particles can easily cling to the fabric.

2. Wear a cover-up

A cover-up can help to keep sand off your swimsuit. Choose a cover-up that is made of lightweight, breathable fabric so that you don’t get too hot.

3. Rinse off regularly

If you find that sand is getting into your swimsuit, rinse it off regularly with fresh water. This will help to prevent the sand from getting too embedded in the fabric.

4. Shake it out

When you’re finished swimming, shake your swimsuit out to remove any loose sand. You can do this inside or outside, but if you do it inside, be sure to shake it over a towel to catch any falling sand.

5. Turn it inside out

When you’re ready to put your swimsuit away, turn it inside out. This will help to keep the fabric from getting stretched out.

6. Store it in a clean, dry place

Store your swimsuit in a clean, dry place. This will help to prevent it from getting stained or damaged.

How To Get Sand Out of Bikini Bottoms?

Step 1: To remove sand from bikini bottoms, shake them vigorously to dislodge loose particles.

Step 2: Rinse with cold water, making sure to flush out any remaining sand.

Step 3: Furthermore, gently brush the fabric to remove stubborn grains.

Step 4: Lastly, air dries away from direct sunlight to avoid damage

How To Get Sand Out Of Rash Guards?

Getting sand out of a rash guard is easy when you follow these steps:

Step 1: First, give the rash guard a vigorous shake to loosen and remove any loose sand particles.

Step 2: Next, rinse it thoroughly with cold water, ensuring that the water flows through the fabric.

Step 3: After rinsing, gently brush the fabric using a soft brush or your fingers to eliminate any remaining sand.

Step 4: If needed, you can repeat the rinsing and brushing process.

Step 5: Finally, allow the rash guard to air dry in a shaded area, away from direct sunlight, before storing it

Conclusion

Following these simple yet effective steps, you can bid farewell to the annoyance of sand clinging to your swimsuit. All you have to do is shake off the loose sand, rinse with fresh water, soak in a vinegar solution, gently rub and rinse, hand wash with a mild detergent, and air dry your swimsuit. Boom! You are good to go.

You may see some products here which has either been used by us or independently selected by (obsessive) editors. As an affiliate of Amazon, Anything purchased through our links may earn us a commission at no extra cost to you. 

Leave a Reply

Your email address will not be published. Required fields are marked *