3 Methods For Stringing Your Swim Trunks

Tying your swim trunks in the right way is crucial to ensure you’re comfortable and free to enjoy your time in the water. If your string is loose or tied incorrectly, it can lead to discomfort, embarrassment, or even chafing. 

However, in this blog post, I’ll walk you through the types and steps to tie your swim trunks correctly so that you have a secure and snug fit. 

3 Methods For Stringing Your Swim Trunks

When it comes to fastening your swim trunks, you have a few options depending on the type of trunks you have. Regardless of your chosen method, your goal should be to tie the string tight enough to hold your trunks in place without constricting your circulation or causing discomfort.

Below are step-by-step guides on how to properly fasten your swim trunks for maximum comfort:

Method 1: The basic knot

The basic knot is the most common method used to fasten swim trunks. Follow these steps:

• Start by laying your trunks flat with the front side facing up.
• Take the string and thread it through the loop located in the center of the waistband of your trunks.
• Pull the string until both ends are even.
• Tie the ends of the string together in a simple knot.
• Pull the knot tight, ensuring it is snug but not too tight.

Method 2: The loop and tie

The loop and tie method is similar to the basic knot method, but it creates a loop that can be used to adjust the tightness of the string. Here are the steps to follow:

• Thread the string through the loop at the center of the trunk’s waistband.
• Pull the string until both ends are even.
• Tie the ends of the string together in a simple knot, but don’t pull the knot tight just yet.
• Create a loop with one of the string ends by folding it back on itself.
• Hold the loop in place with your thumb and use your other hand to tie a knot around the loop using the other string end.
• Pull the knot tight, and adjust the tightness of the loop as needed.

Method 3: The drawstring

Some swim trunks come equipped with a drawstring that can be adjusted to fit your waist comfortably. Follow these steps:

• Place your trunks on a flat surface with the front side facing up.
• Locate the drawstring on the inside of the waistband and pull it out.
• Tie the drawstring in a simple knot.
• Pull the knot tight, and adjust the tightness of the drawstring as needed.

5 Tips for Maintaining Your Swim Trunk Strings

Taking care of your swim trunk strings is important to ensure they last longer and provide a comfortable fit. Here are some tips to help you maintain your swim trunk strings:

1. Untie the strings before washing.

Make sure to untie the strings before washing your swim trunks. This will prevent damage and keep the strings from tangling with other clothing in the washing machine.

2. Avoid harsh detergents

Using harsh detergents or bleach can weaken the strings and cause them to fray or break. Instead, use a mild detergent and follow the care instructions on the swim trunks.

3. Rinse after use

After swimming, rinse your swim trunks with fresh water to remove any chlorine or salt water that can damage the strings. This will also help to prevent discoloration and fading of the fabric.

4. Hang dry

Avoid using a dryer to dry your swim trunks, as the heat can damage the strings. Instead, hang them up to air dry. If you need to speed up the drying process, use a fan or hang them outside in the sun.

5. Replace damaged strings

If you notice that your swim trunk strings are frayed or damaged, replace them with new ones to ensure a proper fit and comfort. You can find replacement strings at most sporting goods stores or online.

How to Put the Drawstring Back Into Swim Trunks

First, you’ll need a pair of swim trunks with a drawstring, a safety pin, or a drawstring threader. Got those? Great, let’s get started!

Step 1: Locate the hole in the waistband and thread the drawstring through

Take one end of the drawstring and insert it into the hole in the waistband of your swim trunks. Use your fingers to guide the drawstring through the waistband until it reaches the other side.

Step 2: Tie a knot at the end of the drawstring

Once the drawstring is through the waistband, tie a knot at the end of the drawstring to prevent it from slipping back through the hole.

Step 3: Use a safety pin or drawstring threader

This step requires either a safety pin or a drawstring threader. If you have a drawstring threader, thread the drawstring through the eye of the threader and push the threader through the hole in the waistband. Then, pull the threader out from the other side of the waistband, and the drawstring should come out with it.

If you don’t have a drawstring threader, don’t worry. You can use a safety pin instead. Simply attach the safety pin to the end of the drawstring and push the safety pin through the hole in the waistband. Once the safety pin comes out the other side of the waistband, grab onto the end of the drawstring and pull it through.

Step 4: Adjust the length of the drawstring

Once the drawstring is through the waistband, adjust the length of the drawstring to your desired tightness by pulling on both ends of the drawstring until it’s snug but not too tight.

Step 5: Tie a knot at the end of the drawstring

Lastly, tie a knot at the end of the drawstring to keep it in place. Ensure the knot is tight but not too tight so that it’s uncomfortable to wear.

Conclusion

Following these simple steps to string your swim trunks for comfort will make you enjoy your time at the beach or pool without constantly adjusting your waistband.

Remember to choose a comfortable, durable string, and tie it in a knot that won’t come undone easily. You can also experiment with different tying methods until you find the best.

Also, by taking the time to string your swim trunks properly, you can focus on having fun in the water instead of worrying about your trunks falling off or causing discomfort.